Product Description
The newest model with the latest Gyroscope technologies. The typical 3 channels let you to fly : up, down, turn left, turn perfect, move forward, backward. This new three.5 channels does all that, plus it let you manage the speed, you can either fly in low or high speed by basically switch the speed manage button. There are not lots of flying around, be the 1st to personal 1 of this stunning helicopter. This New DH 9053 three.5CH Gyro Metal RC Helicopter is fully assembled with all pre-flight adjustments completed. Basically eliminate it from the box, charge and insert the batteries, and get prepared to take-off. The package is equipped with everything necessary to get airborne (except 8 AA batteries for the remote controller).
Product Details
- Product Dimensions: 34 x 11.9 x 5.5 inches ; 1.2 pounds
- Shipping Weight: 6.2 pounds (View shipping rates and policies)
- ASIN: B004PBJPN8
- Item model number: NCAN9053
- Manufacturer recommended age: 14 years and up
- Batteries: 8 AA batteries required.
- Amazon Best Sellers Rank: 26 in Toys ; Games (See Top 100 in Toys ; Games)
- 7 inToys ; Games Hobbies Radio Control Helicopters
By : Cobra
Price : $44.95
You Save : $151.04 (77%)
Item Functions
- Full function three.5 channel radio manage (turn left, turn proper, up, down, forward, backward, can also fly in high or low speed)
- 3.five channel digital proportional control.Built in Gyro for Added Stability
- Flies more than 100m high. two powerful 180 principal motors + N20 tail motor
- Total Kit, Prepared to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the radio transmitter to get started flying)
- Suitable for 14+ ages. Frequencies Colors differ.
Client Critiques
Ok I did not purchase this on Amazon, I got it at a neighborhood expo show and paid a small alot more but it is the exact same heli. This is a extremely good helicopter and despite other critiques appears to be particularly durable. To give an instance I have crashed several times, such as into the ground, into a tree, a telephone pole, a steel automotive lift (the factors that lift cars in mechanic shops), although I have a handful of dents and dings in the rotors they are nevertheless solid and it nevertheless flies. The balance bar bent as well but I just bent it back and all is properly. I would call that fairly good taking into consideration some of the extra high dollar helis like my friend has the rotor will shatter upon get in touch with with a solid surface.
There is a mastering curve to flying this. Just given that it is a gyro copter, dont think that you can just take it out and fly with out crashing. I had a hard time receiving off the ground for the very first day, ground impact came in and created it go left each and every time. Soon after some practice and messing with the trim tabs on day two I got really great at it. It is affected by wind but ALL helicopters are. This is to consist of real helicopters. Not some thing I usually bring up but in this case it may possibly support, I use to be on a flight line with the AH-64A and AH-64D on a standard basis, I also worked on the guidance systems and weapons. Wind has a dramatic influence on a massive heli so modest winds can and will knock an RC to the ground. To start off learning either do it on a day with no wind or come across a health club/auditorium to get started.
Battery time is not poor, I get about 15 minutes per charge, it takes about two.5 hrs to recharge the battery. I just ordered five even more batteries right here on amazon so that I can get about an hour or extra of play time ahead of getting to wait on a charge. Overall I am happy with the obtain and basically am going to get a single for my buddy who paid more than 400 on his Pro heli that is too tough to get off the ground. I figure use these a mastering tool then get to the larger alot more advanced 4 - 6 channel helis.
Once again just a suggestion, but get beneficial with it at about 1.five - 2 ft off the ground very first. Its tougher to fly closer to the ground mainly because of ground effects so if you can get excellent close to the ground you ought to have no troubles higher in the air.
For the price, you basically get a fairly decent piece of hardware. That becoming stated, there are a couple of modifications I would make before use. It says ready to fly on the box, and fly it will... how nicely is unquestionably open to debate. The 1st factor is to take away the canopy, loosen the battery, and slide it most of the way forward, then tighten the mounting bracket down again. This will move the center of gravity forward. This is essential considering that without undertaking this, you literally can not fly forwards. Other mods to enhance maneuverability are to shorten the tail boom, slide the landing skids forward (simple), and replace the rear tail rotor with a single of these: [...]
Just after replacing the rear rotor you will have to move the rear stabilizers up on the boom to make room for the bigger blades.
Another mod that helps a lot is to replace the battery with a larger one, like a 15c 7.4v 3000mah. This also improves the flight characteristics by increasing weight in the nose, and over all (much less likely to be batted about by the wind)
Make certain to obtain a complete set of replacement parts. You will have to have them... the helicopter is tough, dont get be wrong (I have crashed from 40+ feet with little to no harm) but there are breakable parts like the blade holders. (they are low-cost, get a hand full)
And here is a link to a forum which has a lot of wonderful info about how to make this good small chopper a amazing 1. For the cost, its actually a outstanding deal.
[...]
[...]
A lot of many people seem to knock this helicopter considering that they do not ever want to operate on it. That is component of the hobby... Improving and repairing the equipment. Its not all that complex, and the parts are Low cost, which is a boon. There are countless 'hobby grade' helicopters out there you could invest a lot far more income on that most likely fly improved and so on... but the expense of maintainability goes WAY up. Give some thought to that for an initial investment of ~$60 its pretty a hoot.
No comments:
Post a Comment